Sustainable construction also means circular construction: Lindner focuses on closed material cycles, reusable system products and the development of circular business models.
Sustainability” has long been a guiding principle in the Lindner Group’s corporate history. This is implemented through the optimization of production facilities and manufacturing processes, recyclable expansion solutions and the selection of environmentally friendly, healthy materials. But instead of resting on its laurels, the full-service provider is constantly developing its products and services and striving for a closed product cycle. Thanks to circular business models in the form of rental and take-back options, the product life cycle is to be extended in future and the full value creation potential exploited.
Four paths to the goal
Lindner implements the circular concept using four possible approaches: The primary aim is to be able to reuse a product, i.e. to dismantle the original product and use it for the same purpose, in the same building or in another building, without reprocessing. If this is not possible, the product is reused. In this case, the original product or its components are returned to the factory for reprocessing after non-destructive dismantling before being put to a new use. In recovery, on the other hand, the product form is broken down into its materials, which are then integrated into a new Lindner production process. Recycling is the last option, whereby products are broken down into their complete form following selective demolition and the materials are used in an external recycling cycle.
Turning theory into reality
The best basis for a functioning business model: a well-founded examination of the topic. One of the ways in which the Lindner Group has implemented this is through the “RessProKA” research project, which took place as part of the ReziProK (resource-efficient circular economy – innovative product cycles) funding measure of the Federal Ministry of Education and Research. In a consortium with the Business Institute for Waste and Environmental Studies (BIFAS) and the Institute for Infrastructure-Water-Resources-Environment (IWARU) at Münster University of Applied Sciences, the question “How can construction products in commercial premises be kept in circulation for as long as possible?” was investigated.
Recognizing and solving problems
Various scenarios were thought through and discussed in simulation games with partners from architecture, project development and the real estate sector. The basis for this was the classic commercial tenant fit-out: due to constantly changing user requirements and frequent tenant changes, rental projects are often converted at short intervals, often in less than ten years. This is despite the fact that the building products and materials used can be used for much longer. For example: a Lindner NORTEC raised access floor panel has a technical service life of at least 50 years.
The result of the planning game was a holistic approach: the interior is viewed as a single unit, with modular elements for the ceiling, floor and walls. If there is a change of tenant, the system products remain in the building and are merely rearranged. This means that no resources are used for transportation, disposal or the manufacture of new products. Alternatively, the products or components are taken back, checked and processed so that they can then be used as secondary products.
How Lindner implements the circular concept
This theoretical solution is already a reality at Lindner: Lindner takes back its system products in various constellations. After joint planning, these are sometimes professionally rebuilt by the company or dismantled and taken back itself. The panels are then reconditioned in the factory and finally reused. The recycled floor panels have the same physical properties as the new ones, but with a 73 percent bettercarbon footprint. The reuse approach is also pursued for partition wall and ceiling systems as well as wooden doors. The decisive factor here is a modular, circular product design: uniform dimensions create the basis and make the systems interchangeable. At the end of the product life cycle, the materials are then separated by type, recycled and returned to the material cycle.
Find out more about circular construction and ReUsed products from Lindner.