Transport digitization as a service – Mobility-as-a-Platform

Building design
a-blue-bus-drives-down-a-street-next-to-high-buildings-p_Gg3dlEzwg

Street scene in Munich with blue bus and modern skyline, taken by Bruna Santos.

Mobilität digital, vernetzt, als Service? Was nach Silicon Valley klingt, ist längst die große Herausforderung für Stadtplaner von Hamburg bis Zürich. „Mobility-as-a-Platform“ verspricht nicht weniger als die Revolution des urbanen Verkehrs – doch wie funktioniert das Zusammenspiel von Digitalisierung, Dienstleistung und nachhaltiger Mobilität wirklich? Wer treibt diese Entwicklung, wie profitieren Städte, und wo lauern die Risiken? Willkommen in der Ära, in der der digitale Verkehrsdienst zur Schaltzentrale der Stadt wird.

  • Definition und Ursprung von „Mobility-as-a-Platform“ und Verkehrs-Digitalisierung
  • Technologische Grundlagen: Open Urban Platforms, Datenintegration, Schnittstellen
  • Praxisbeispiele aus Deutschland, Österreich und der Schweiz
  • Chancen für nachhaltige Stadtentwicklung, Klimaschutz und Verkehrsfluss
  • Neue Governance-Strukturen, Akteurslandschaften und Beteiligungsmodelle
  • Risiken: Datenhoheit, Kommerzialisierung, soziale Spaltung und algorithmische Verzerrung
  • Praktische Herausforderungen bei Implementierung und Betrieb
  • Perspektiven für die Stadt- und Verkehrsplanung der Zukunft

Mobility-as-a-Platform: Verkehr wird zur digitalen Dienstleistung

Wer heute Mobilität plant, muss mehr als Buslinien und Radwege im Blick haben. Mit dem Schlagwort „Mobility-as-a-Platform“ (MaaP) betritt ein Konzept die urbane Bühne, das den Verkehr von Grund auf neu denkt. Im Kern steht nicht mehr das einzelne Verkehrsmittel, sondern eine digitale Plattform, die sämtliche Mobilitätsangebote bündelt, koordiniert und als Service bereitstellt. Von Carsharing über On-Demand-Busse bis zu klassischen ÖPNV-Angeboten verschmelzen die Mobilitätsoptionen zu einem nutzerzentrierten, digitalen Ökosystem.

Der Ursprung von MaaP liegt in der Idee, Mobilität nicht länger als Produkt – etwa das eigene Auto – zu verstehen, sondern als flexiblen, situationsabhängigen Dienst. Möglich wird das durch die umfassende Digitalisierung urbaner Infrastrukturen, die Echtzeitdaten, Buchungsfunktionen und Zahlungsprozesse verbindet. Nutzer erhalten Zugang zu allen verfügbaren Verkehrsmitteln über eine einzige Plattform – meist als App – und können so je nach Bedarf, Wetter, Tageszeit oder persönlicher Präferenz wählen.

Für Planer und Städte bedeutet das einen Paradigmenwechsel. Statt starre Verkehrsnetze zu optimieren, geht es darum, Mobilität als dynamischen, intelligenten Dienst zu orchestrieren. Die Plattform wird zur Schaltzentrale, die Verkehrsströme lenkt, Kapazitäten ausbalanciert und Angebot wie Nachfrage in Echtzeit synchronisiert. Aus der klassischen Verkehrsplanung wird so eine immer wieder neu zu gestaltende Prozessarchitektur, bei der Daten zum zentralen Rohstoff werden.

Wesentlich ist dabei die offene Schnittstellenlogik, die sogenannte Open Urban Platform. Sie sorgt dafür, dass verschiedene Anbieter – öffentliche Verkehrsbetriebe, private Sharing-Dienste, neue Mobilitätsstartups – ihre Angebote einbringen können. Gleichzeitig ermöglicht sie die Integration von Verkehrs-, Wetter- und Umweltdaten, um den Service kontinuierlich zu verbessern. Damit wird MaaP zur digitalen Bühne, auf der urbane Mobilität als flexibler Service für alle orchestriert wird – und nicht zuletzt zur Arena, in der sich neue Geschäftsmodelle und Governance-Formen entwickeln.

Doch wie sieht die konkrete Umsetzung aus? Was ist technisch und organisatorisch nötig, damit die Plattform nicht zum Papiertiger verkommt? Und wie wirkt sich das auf Stadtgestaltung, Flächennutzung und Verkehrsinfrastruktur aus? Die Antworten darauf sind so vielfältig wie die Städte selbst – doch der Trend ist eindeutig: Verkehrs-Digitalisierung als Dienstleistung ist gekommen, um zu bleiben.

Technologische Basis: Datenströme, Schnittstellen und urbane Intelligenz

Die technologische Grundlage von Mobility-as-a-Platform ist alles andere als trivial. Im Zentrum steht die Vernetzung von Datenquellen, Systemen und Akteuren, die bisher oft in Silos agierten. Das beginnt bei der Integration von Echtzeitdaten aus unterschiedlichen Verkehrsträgern: Busse, Bahnen, Leihräder, E-Scooter, Carsharing-Flotten, Taxen und zunehmend auch autonome Shuttles liefern Bewegungs-, Kapazitäts- und Standortdaten in Sekundenschnelle. Ergänzt werden diese Informationen durch Wetterdaten, Baustellenhinweise, Großveranstaltungen, Umweltmessungen und sogar individuelle Präferenzen der Nutzer.

All diese Datenströme laufen in einer zentralen, modular aufgebauten Plattform zusammen. Hier werden sie aggregiert, analysiert und für verschiedene Services aufbereitet. Herzstück sind offene Programmierschnittstellen (APIs), über die Verkehrsanbieter, Stadtverwaltungen, Drittanbieter oder auch Forschungseinrichtungen Zugriff erhalten. Die Plattform selbst wird zum integrativen Betriebssystem der urbanen Mobilität, das nicht nur Informationen ausspielt, sondern auch Prozesse steuert: Ticketbuchung, Reservierung, Routing, Preisgestaltung und sogar CO₂-Bilanzierung laufen über diesen digitalen Knotenpunkt.

Bedeutend ist dabei das Prinzip der Interoperabilität. Mobilität als Dienstleistung funktioniert nur, wenn die Systeme verschiedener Anbieter reibungslos miteinander kommunizieren. Standardisierte Datenformate, offene Schnittstellen und gemeinsame Protokolle sind daher Pflicht. Ohne sie bleibt die Plattform fragmentiert – und die Nutzer buchen weiter jede Fahrt einzeln, statt ihre Wege flexibel zu kombinieren.

Ein weiteres zentrales Element ist die urbane Intelligenz: Mithilfe von Algorithmen, maschinellem Lernen und Simulationsmodellen werden Angebot und Nachfrage kontinuierlich aufeinander abgestimmt. Die Plattform lernt, welche Routen besonders gefragt sind, wie sich Verkehrsflüsse je nach Wetter oder Tageszeit verändern und wie Sharing-Angebote effizient verteilt werden müssen. So kann sie nicht nur auf Störungen oder Engpässe reagieren, sondern Mobilität proaktiv steuern – etwa durch Preisanreize, alternative Routenvorschläge oder kapazitätsorientierte Einsatzplanung.

Doch mit der technologischen Potenz wachsen auch die Herausforderungen: Datenschutz, IT-Sicherheit, Systemverfügbarkeit und Transparenz sind alles andere als Selbstläufer. Wer die Plattform kontrolliert, entscheidet maßgeblich darüber, wie offen, inklusiv und gemeinwohlorientiert der Zugang zur urbanen Mobilität bleibt. Hier sind Städte und Planer gefordert, klare Governance-Strukturen und verlässliche Regulierungsrahmen zu schaffen, die Innovation ermöglichen und Interessen ausbalancieren.

Von Hamburg bis Wien: Praxis und Pilotprojekte im deutschsprachigen Raum

Die große Vision von Mobility-as-a-Platform ist längst keine Zukunftsmusik mehr. Zahlreiche Städte im deutschsprachigen Raum haben den Sprung ins Plattformzeitalter gewagt – mit ganz eigenen Modellen, Schwerpunkten und Herausforderungen. In Hamburg beispielsweise bildet die „switchh“-Plattform seit Jahren das Rückgrat einer multimodalen Verkehrspolitik. Hier werden ÖPNV, Carsharing, Bikesharing und Taxen in einer App gebündelt, sodass Nutzer ihre Wege flexibel und nahtlos planen können. Die Stadt arbeitet dabei eng mit privaten Anbietern zusammen und setzt auf offene Datenstandards, um das Angebot kontinuierlich zu erweitern.

München wiederum testet mit „München unterwegs“ eine Plattform, die zusätzlich zu klassischen Sharing-Angeboten auch Parkraum- und Elektro-Ladeinfrastruktur integriert. Besonders spannend ist die Anbindung an die städtische Verkehrsleitstelle, die Echtzeitinformationen zu Staus, Baustellen oder Wetterlagen bereitstellt. So werden nicht nur individuelle Fahrten optimiert, sondern auch der Gesamtverkehr smarter gesteuert – ein wichtiger Schritt auf dem Weg zur emissionsarmen, ressourceneffizienten Stadt.

Im österreichischen Wien ist mit „WienMobil“ eine Plattform am Start, die als Vorbild für die Integration unterschiedlichster urbaner Lebensbereiche gilt. Neben Verkehrsdiensten finden sich hier auch Leihgeräte, Events, Nahversorger und sogar Sharing-Angebote für Werkzeuge oder Bücher. Der Plattformgedanke wird konsequent ausgedehnt – mit dem Ziel, die Stadt als Service zu denken, der weit über Mobilität hinausgeht. Die Synergien für Planung und Stadtentwicklung sind enorm: Wer weiß, wann und wo sich Mobilitätsbedarfe verschieben, kann Flächen neu denken, Verkehrsberuhigung gezielter steuern und Quartiere nachhaltiger entwickeln.

Auch in der Schweiz gibt es spannende Ansätze: Zürich setzt auf die Open-Source-Plattform „Swiss Mobility Platform“, die in Kooperation mit mehreren Städten entwickelt wurde. Ziel ist es, ein föderal kompatibles, skalierbares System zu schaffen, das sich unterschiedlichen regionalen Bedürfnissen anpassen lässt. Hier zeigt sich eine Stärke des deutschsprachigen Raums: die Fähigkeit, technologische Innovation mit kommunaler Vielfalt und demokratischer Partizipation zu verbinden.

Allerdings sind die Hürden nicht zu unterschätzen. Viele Projekte kämpfen mit fragmentierten Zuständigkeiten, Datenschutzbedenken, komplexen Vergabeverfahren und teils widersprüchlichen Interessen zwischen öffentlichen und privaten Akteuren. Hinzu kommt eine Kultur der Vorsicht – nicht selten werden Chancen ausgebremst, weil Standards fehlen oder die Angst vor Kontrollverlust überwiegt. Doch die Pilotprojekte zeigen: Die Zukunft urbaner Mobilität wird auf Plattformen gebaut – und wer heute investiert, gestaltet die Stadt von morgen maßgeblich mit.

Chancen und Risiken: Nachhaltigkeit, Governance und soziale Teilhabe

Die Potenziale von Mobility-as-a-Platform sind gewaltig – gerade für nachhaltige Stadtentwicklung, Klimaschutz und urbane Lebensqualität. Durch die intelligente Bündelung und Steuerung von Mobilitätsangeboten lassen sich Verkehrsflüsse entzerren, Emissionen reduzieren und Flächen effizienter nutzen. Sharing-Dienste und On-Demand-Verkehre entlasten das Straßennetz, machen individuelle Autos entbehrlich und schaffen Raum für Grünflächen, Radwege oder neue Quartiersnutzungen. Wer Mobilität als Dienstleistung denkt, plant nicht nur Verkehr, sondern gestaltet die Stadt als Lebensraum neu.

Doch die Plattformisierung bringt auch neue Herausforderungen für Governance und Beteiligung. Wer entscheidet, welche Angebote auf die Plattform kommen? Wie werden Preise, Prioritäten und Zugang geregelt? Und welche Daten werden wie verarbeitet? Hier müssen Städte und Planer neue Kompetenzen entwickeln, um die Balance zwischen Innovation und Gemeinwohlinteressen zu halten. Open-Source-Lösungen, transparente Algorithmen und partizipative Steuerungsmodelle sind keine Kür, sondern Pflicht.

Ein weiteres Risiko liegt in der Kommerzialisierung und Monopolisierung urbaner Mobilitätsdienste. Wenn private Plattformbetreiber die Hoheit über Daten, Schnittstellen und Preise gewinnen, droht die Gefahr, dass bestimmte Nutzergruppen ausgeschlossen oder benachteiligt werden. Algorithmische Verzerrungen, sogenannte Biases, können soziale Spaltungen verstärken – etwa wenn ärmere Quartiere schlechter angebunden oder Sharing-Angebote gezielt auf zahlungskräftige Zielgruppen ausgerichtet werden. Hier braucht es klare Leitplanken, die Inklusion, Chancengleichheit und Transparenz sichern.

Auch die Frage der Datensouveränität ist zentral: Wem gehören die Bewegungsdaten, die auf der Plattform generiert werden? Wie werden sie geschützt, anonymisiert und genutzt? Und wie können Städte sicherstellen, dass die Digitalisierung des Verkehrs nicht zum Selbstzweck wird, sondern echte Mehrwerte für die Bevölkerung schafft? Gerade im europäischen Kontext – mit strengen Datenschutzregeln und hohem Anspruch an Gemeinwohlorientierung – sind hier innovative Lösungen und mutige Governance-Modelle gefragt.

Letztlich bietet Mobility-as-a-Platform aber auch die Chance, Planung und Beteiligung grundlegend neu zu denken. Digitale Plattformen können Bürgern niedrigschwellige Möglichkeiten eröffnen, ihre Mobilitätsbedarfe zu artikulieren, an der Entwicklung von Services mitzuwirken und die Auswirkungen geplanter Maßnahmen in Echtzeit nachzuvollziehen. So wird aus der Plattform nicht nur ein Verkehrsdienst, sondern eine Arena für demokratische Stadtgestaltung – wenn sie offen, nachvollziehbar und partizipativ gebaut wird.

Ausblick: Die Stadt als Plattform – und die Rolle der Planer

Wer heute Verkehr plant, muss in Plattformen denken. Die Digitalisierung macht aus dem klassischen Verkehrsnetz ein lebendiges, lernendes System, das Mobilitätsbedarfe nicht nur abbildet, sondern aktiv formt. Für Planer, Städte und Landschaftsarchitekten eröffnet das ungeahnte Gestaltungsspielräume – aber auch völlig neue Verantwortlichkeiten. Es reicht nicht mehr, Radwege zu zeichnen oder Parkplätze umzuplanen. Gefragt ist die Fähigkeit, Datenströme zu verstehen, Schnittstellen zu orchestrieren und Governance-Prozesse zu moderieren.

Mobility-as-a-Platform macht die Stadt zum flexiblen Service-Ökosystem. Das bedeutet auch, dass die Grenzen zwischen Verkehrsplanung, Stadtentwicklung und Digitalisierung immer mehr verschwimmen. Wer erfolgreich sein will, muss interdisziplinär arbeiten, neue Akteurskonstellationen moderieren und technologische wie rechtliche Innovationen vorantreiben. Die Plattformlogik zwingt Verwaltungen, Silos zu überwinden und sich als Gestalter digitaler Infrastrukturen zu begreifen.

Gleichzeitig öffnet sich ein neues Fenster für nachhaltige Stadtentwicklung: Flächen können multifunktional genutzt, Verkehrsberuhigung gezielter umgesetzt, Klimaziele ambitionierter verfolgt werden. Die Plattform liefert das Werkzeug, um urbane Räume dynamisch, adaptiv und nutzerzentriert zu gestalten. Doch das gelingt nur, wenn Städte den Mut haben, die Kontrolle über Daten und Plattformen nicht vollständig aus der Hand zu geben – und stattdessen auf offene, gemeinwohlorientierte Modelle setzen.

Die kommenden Jahre werden zeigen, welche Städte und Regionen es schaffen, Mobility-as-a-Platform als Chance für mehr Nachhaltigkeit, Teilhabe und Lebensqualität zu nutzen. Klar ist: Wer heute investiert – in offene Technologien, Standards, Kompetenzen und Partizipation – gestaltet nicht nur den Verkehr von morgen, sondern die Stadt als Ganzes. Und wer weiter auf Insellösungen, proprietäre Systeme oder kurzfristige Pilotprojekte setzt, riskiert den digitalen Stillstand.

Die Zukunft der urbanen Mobilität ist digital, vernetzt und als Service organisiert. Für Planer, Städte und Landschaftsarchitekten bietet das die historische Chance, aus der Verkehrsplanung ein zentrales Instrument für soziale, ökologische und räumliche Innovation zu machen. Der Weg dahin ist anspruchsvoll – aber die Plattform wartet nicht.

Fazit

Verkehrs-Digitalisierung als Dienstleistung ist weit mehr als ein technisches Update für den Stadtverkehr – sie ist ein Paradigmenwechsel für die urbane Entwicklung im gesamten deutschsprachigen Raum. Mobility-as-a-Platform verbindet technologische Innovation mit neuen Governance-Ansätzen, nachhaltiger Planung und demokratischer Teilhabe. Die Plattform wird zum Betriebssystem der Stadt, in dem Mobilität nicht mehr als starres Netz, sondern als flexibler, lernender Service für alle gestaltet wird. Die Herausforderungen sind groß: Datenhoheit, soziale Gerechtigkeit, Standardisierung und Transparenz müssen aktiv gestaltet werden. Doch die Chancen sind mindestens ebenso gewaltig. Wer jetzt mutig voranschreitet, kann Verkehrsplanung, Stadtentwicklung und nachhaltige Mobilität auf ein neues Level heben – und zeigt, wie die Stadt der Zukunft wirklich funktionieren kann. G+L bleibt dabei Ihr Wegweiser durch den digitalen Urbanismus, kritisch, kompetent und immer einen Schritt voraus.

POTREBBE INTERESSARTI ANCHE

Reduce cement crusts on marble

Building design

The epitaph of Konrad Popp, left: front view. Right: right side view. Institute for Conservation and Restoration, University of Applied Arts Vienna / Sarah Moyschewitz.

The marble epitaph of Konrad Popp from the late 16th century, which was attached to the southern outer wall of the parish church of St. Leonhard in Lavanttal (Carinthia), was examined and restored at the Institute for Conservation and Restoration at the University of Applied Arts Vienna due to its endangered condition.
At the time of dismantling from the wall structure, some areas of the object exhibited severe sugar-grained decay, which in some cases was accompanied by pronounced biogenic growth. Various forms of crust were found in the central area, which were identified and reduced in further steps. One crust, which was most likely formed by cement dust, and its reduction will be the focus of the investigation. […]

The marble epitaph of Konrad Popp from the late 16th century, which was attached to the southern outer wall of the parish church of St. Leonhard in Lavanttal (Carinthia), was examined and restored at the Institute for Conservation and Restoration at the University of Applied Arts Vienna due to its endangered condition.
At the time of dismantling from the wall structure, some areas of the object exhibited severe sugar-grained decay, which in some cases was accompanied by pronounced biogenic growth. Various forms of crust were found in the central area, which were identified and reduced in further steps. One crust, which was most likely formed by cement dust, and its reduction will be the focus of the investigation.

The memorial consists of eight white marble blocks (H:271 cm x W:125 cm x D: 40 cm) and shows the founder Konrad Popp and his family in the central field in an adorative pose. The relief rests on an inscription cartouche that reveals demographic information about the donor and is surmounted by a triangular pediment showing the coat of arms of the Popp family. The formal language is characterized by the volutes, expressive faces and the disproportionately and exaggeratedly depicted bodies, which appear mannerist and point to the end of the Renaissance. Like the design of the front side, the back of the marble blocks is highly interesting due to its shape: the blocks are not cut straight on the back and show almost no traces of carving.
To determine the stone more precisely, samples were taken and thin sections made which were examined under a light microscope and a scanning electron microscope (SEM-EDX). The medium-grained marble (crystals up to 2 mm) shows a high dolomite content (about 65 percent), as well as a high proportion of silicate minerals (about five percent) for marble, including the accessory phlogopite (Figure 2). This can be seen macroscopically as golden-yellow platelets in the marble and, in combination with the high dolomite content, is characteristic of marble deposits in the nearby Koralpe.

The installation situation of the epitaph was analyzed in order to determine the damage mechanisms. The object was sunk into a buttress on the southern outer wall, which is why it was aligned to the east (Figure 3). The installation situation can be defined as the main cause of the damage due to a structural-physical problem in the church building and the orientation. The recent façade plaster was identified as cement plaster and can be traced back to the façade renovation of the 1970s by consulting existing archival documents. The plaster lies on a natural stone masonry, which was covered with a lime plaster. This poses a problem, as cement plasters have a low water vapor diffusion capacity and do not dissipate the soil moisture absorbed by the natural stone masonry to the outside, which leads to damage on the inside of the church wall. The problem is exacerbated by the non-functioning rainwater drainage in the area of the buttresses, which is why some of the water was drained away via the façade and, at the same time, via the epitaph. The orientation of the epitaph to the east can also be described as problematic in the context of the thermal dilatation of marble. If the marble is warmed by the morning sun within a short period of time, a large temperature difference can be reached or a freeze-thaw cycle can occur more frequently. In combination with the high and permanent availability of water and the protected areas in the relief of the object, the orientation towards the morning sun optimally fulfils the growth conditions for biogenic colonization.

The marble shows a loosened structure in the exposed areas as a result of sugary-grained decay, which has been able to progress far, particularly due to a combined effect with the biogenic growth. The biogenic growth comprises a wide range of organisms, including fungi, lichens and bacteria. In addition to the weakened areas, there are also areas compacted by crusts, which can be divided into lime sinter, gypsum and cement crusts. The cement crust is a rare phenomenon and could only be determined by sampling and analyzing the cross-sections. Macroscopically, it appeared as a hard and brittle ochre-colored crust with a “pustular” surface morphology (Figure 4). Under the scanning electron microscope, a multi-layered structure of the crust was revealed: a hydraulic lime crust was present on the marble, which was firmly bonded to the rock. The remains of a hydraulic binder were found above this, which originated from a Portland cement and were covered by a gypsum crust (Figure 5). Due to the shape of the crust, it could be ruled out that this could have reached the surface as mortar splashes when the façade plaster was applied. The stratigraphy of the crust and the affected areas indicate that the formation can be attributed to cement dust, although the church is located in a rural area. It can therefore be assumed that the cement reached the surface of the building with the wind during the renovation of the façade in the 1970s and was able to form a crust in combination with moisture.

Cleaning and exposing the surface of microbiogenic growth and the various crusts was the focus of the concept of measures in addition to securing the existing structure by strengthening and reinforcing it. The treatment of the cement crust posed a particular challenge that required an unusual approach. Initial attempts to reduce this mechanically using fine tools or lasers did not produce satisfactory results, which is why the microparticle blasting method was used. Here, too, it was found that the hardness and irregularity of the crust meant that there was a high risk of the underlying marble also being processed. Microparticle blasting is a linear process in which a uniform amount of blasting material hits the treated area at a constant pressure. On a harder surface, the process is automatically slower and less effective. Due to the irregular surface morphology, thinner areas of the crust had already been removed within a short time and the marble had already been treated, while in other areas the crust was still almost in its original layer thickness. In order to apply the process as gently as possible, it was adapted as follows. A leveling layer was created to level the crust and imitate its hardness. A test series was created in advance to test the suitability of different materials as a leveling layer. Cyclododecane, gypsum and Roman cement were included in the test series. The materials were applied evenly with a brush so that the highest points of the crust were visible on the surface and the rest was covered under the leveling layer. Cyclododecane was not convincing due to its insufficient hardness and surface adhesion. Gypsum and Roman cement proved to be good leveling layers: Both materials were easy to apply and hardened quickly. In this case, Roman cement was convincing due to its higher hardness and also due to its color, as the areas to be treated stood out more clearly from the stone surface.

In addition to the material of the leveling layer, two different types of blasting material and various combinations of pressure and quantity of blasting material were tested. Another test area was used to determine the effect of the blasting angle on the degree of invasion of the method, which was applied to a polished marble slab. A flat angle of incidence of the blasting material could enable gentler work than a steep one, which is why a flat angle was chosen as the angle of incidence.
After the adaptations had been determined by test series, the crust on the relief was covered with the leveling layer and the Roman cement was covered with damp cloths for 24 hours to harden. The blasting process could begin the next day. The process is time-consuming due to the removal of the additional material, but the results and ease of application are impressive.

The condition of the marble epitaph was characterized by sugar-grained decay, biogenic growth and various types of crust. In particular, the removal of an unusual cement crust was a challenge that was met by adapting the microparticle blasting process. The process, which has been adapted using an equalizing layer, is a gentle way of reducing hard and, in particular, uneven deposits, while at the same time allowing the blasting progress to be easily observed. The technique is easy to use, makes it easier to control the blasting progress and makes the process safer. Furthermore, it should be considered that other materials could also be suitable in addition to the use of Roman cement. Through further application and analysis or evaluation, there is the potential to perfect the technique and adapt it for other situations in order to find a broader range of applications and further dissemination.

The investigation and accompanying restoration was carried out as part of Sarah Moyschewitz’s diploma thesis “The marble epitaph of Konrad Popp from the parish church of St. Leonhard in Lavanttal. On the problems of a marble with sugar-grained decay and biogenic growth” at the Institute for Conservation and Restoration (headed by Prof. Dr. Gabriela Krist), University of Applied Arts Vienna in cooperation with the Diocese of Gurk and the Austrian Federal Monuments Office, Carinthian State Conservation Office.

It is assumed that the marble blocks could have been foundlings or blocks that had been left behind in a quarry for some time.

The investigations were carried out under the guidance of sen. Lect. Dr. Farkas Pintér at the Institute for Conservation and Restoration (headed by Prof. Dr. Gabriela Krist), University of Applied Arts Vienna.

⁴Calcite powder and micro glass beads (75-125 micrometers).

⁵The following settings were selected: Micro glass beads 75-125 micrometers, 2.5-3 bar and the emergence angle was kept as flat as possible.

Read more: The Basel Historical Museum embarked on a “mammoth task” and carried out a general inventory of all objects.

BIM 4.0: How Building Information Modeling is revolutionizing the future of the construction industry

Building design

According to a study from 2022, 70% of large construction companies in Europe are already using BIM. With the introduction of BIM 4.0, which integrates IoT, artificial intelligence and blockchain, these companies can significantly increase their efficiency and sustainability. Robs | Unsplash

Building Information Modeling (BIM) 4.0 is more than just an evolution of the original BIM. While previous versions of BIM were mainly used for the visualization and planning of buildings, BIM 4.0 goes beyond this: it is a holistic solution that integrates real-time data and networks all phases of the construction process. BIM 4.0 builds on the principles of previous BIM versions, but brings IoT, cloud technologies, artificial intelligence and blockchain into the construction process to make it more transparent and efficient. […]

Building Information Modeling (BIM) 4.0 is more than just an evolution of the original BIM. While previous versions of BIM were mainly used for the visualization and planning of buildings, BIM 4.0 goes beyond this: it is a holistic solution that integrates real-time data and networks all phases of the construction process. BIM 4.0 builds on the principles of previous BIM versions, but brings IoT, cloud technologies, artificial intelligence and blockchain into the construction process to make it more transparent and efficient.

Fun fact: According to an EU study from 2022, 70% of large construction companies in Europe are already using BIM, and over 35% of companies plan to implement BIM 4.0 in the next five years.

IoT (Internet of Things)

IoT-enabled sensors and devices can be used to continuously monitor building elements. These sensors measure factors such as temperature, humidity, pressure and wear in real time and provide valuable data that flows directly into the BIM model. If a building element is in need of repair, the system can generate a warning and proactively suggest maintenance measures.

Artificial intelligence (AI)

AI analyzes the data collected by IoT devices and can detect patterns that escape the human eye. This enables predictive maintenance that recognizes future problems before they occur. AI also supports architects and engineers during the planning phase through simulations and design analysis, which increases the efficiency and accuracy of construction planning.

Cloud computing

Cloud-based storage means that everyone involved – from the site manager to the architect to the facility manager – has access to up-to-date data, regardless of their location. The cloud also enables the processing of huge amounts of data generated by IoT and AI and promotes collaboration between teams worldwide.

Blockchain

Blockchain ensures that all data is stored securely and cannot be changed. Transparency is essential in construction projects with numerous stakeholders, and blockchain ensures that changes can be tracked at all times. This creates trust and simplifies collaboration.

Practical example: For a large office complex in Berlin, blockchain enabled seamless collaboration between architects, engineers and site managers working simultaneously in different parts of Germany. This allowed the project to be completed without delays.

BIM 4.0 enables improved collaboration and optimized processes in all project phases. The following examples illustrate how this technology is used in practice.

Planning phase

In the planning phase, BIM 4.0 provides architects and engineers with a more precise model of the future building. This includes not only the external form, but also the internal structure and possible uses of the building. This comprehensive information can be used to carry out simulations that show, for example, how the building will react to weather conditions or how the planned materials will change over time.

Construction

On the construction site, IoT sensors enable precise monitoring of processes and materials. Data on the progress of construction work and environmental conditions is sent to the cloud in real time and is available to everyone involved. By using mobile devices, site managers and tradespeople can react quickly to problems and make any necessary adjustments.

Facility management

After completion, the digital BIM model can become the basis for facility management. This is where the “digital twin” comes into play, an exact virtual image of the building that contains all current data on the condition and use of the building. Facility managers can use this information to proactively carry out repairs and maintenance.

Practical example: A hotel in Munich used BIM 4.0 in facility management and was able to reduce energy consumption by 20% as sensors automatically responded to the actual use of the rooms and adjusted the heating and cooling system accordingly.

BIM 4.0 offers numerous advantages, but also brings some challenges.

Advantages of BIM 4.0

  1. Cost efficiency: Early detection of errors and proactive maintenance can reduce construction costs.
  2. Sustainability: Optimized planning and usage processes enable a more resource-efficient construction method.
  3. Transparency and traceability: All changes are documented and can be traced by everyone involved.
  4. Global collaboration: The cloud enables teams from different locations to work together effectively.

Challenges during implementation

  1. High implementation costs: Switching to BIM 4.0 requires a significant investment in technology and training.
  2. Complexity of use: BIM 4.0 is complex and requires specific knowledge, which can make familiarization time-consuming and costly.
  3. Data security: When storing project information in the cloud, data is potentially vulnerable to cyberattacks, which is why comprehensive security measures are necessary.

Expert comment: According to a study by the European Construction Council (EBC), 60% of construction companies are willing to invest in BIM 4.0, but see data security as the biggest challenge.

BIM 4.0 promotes sustainability in the construction industry and helps to use resources efficiently.

Material savings

Detailed planning and material costing minimize the production of surplus material. Architects and engineers can use BIM 4.0 to calculate exact material requirements and avoid waste as early as the planning phase.

Energy efficiency

BIM 4.0 supports energy-efficient construction methods. Simulations can be used to design buildings in such a way that they are operated with minimal energy consumption. The system also ensures that energy is used efficiently during building operation, e.g. by automatically adjusting heating and lighting.

Optimizing the life cycle

With a digital twin, maintenance work can be planned in a targeted manner, which extends the service life of buildings. This conserves resources and reduces the ecological footprint.

Sustainable construction projects: A construction project in Amsterdam used BIM 4.0 to construct an energy-efficient office building. Optimized ventilation and intelligent lighting management enabled the building to be certified as a “green building”.

Developments in the field of BIM 4.0 will continue to accelerate. Some promising approaches could further change the construction industry.

  1. Advanced data analysis through AI: In the near future, AI could be integrated even more deeply into construction planning by making precise predictions about building materials and their service life.
  2. Automated construction sites: Drones and autonomous robots could increasingly take over tasks on the construction site, such as checking construction progress and transporting building materials.
  3. Virtual collaboration on a global level: New cloud and blockchain technologies are making collaboration across national borders easier and more secure.

Innovation view: A pilot project in Japan is already experimenting with autonomous robots that assemble components and correct defects based on BIM data. Such solutions could significantly change the construction industry.

BIM 4.0 has the potential to revolutionize the construction industry. With the integration of real-time data, the use of the cloud and AI and the ability to digitally record the entire life cycle of a construction project, construction processes will become more efficient and sustainable. Companies that adopt BIM 4.0 at an early stage will increase their competitiveness and be able to create modern, resource-efficient buildings.

Final thought: BIM 4.0 is not just a technological update, but a new way of building. Those who invest today are shaping the future of architecture – and ensuring a construction method that takes equal account of the needs of people and the environment.

Also: Read more about vertical cities with high-rise buildings as a solution for urban growth.